Error Code Description
Action/
Possible Failing FRU
20D0 9005 Subsystem serial number field is empty in
VPD
1. If the location code starts with U1.17 or
U1.18, the problem is in the system VPD
module on the media subsystem operator
panel. Replace the operator panel; do not
swap the old VPD module onto the new
operator panel. Call service support for
instructions on programming the VPD
information into the new VPD module.
2. If the location code indicates an I/O
subsystem, call service support.
20D0 9006 Duplicate subsystem serial number found in
VPD
1. If the location code starts with U1.17 or
U1.18, the problem is in the system VPD
module on the media subsystem operator
panel. Replace the operator panel; do not
swap the old VPD module onto the new
operator panel. Call service support for
instructions on programming the VPD
information into the new VPD module.
2. If the location code indicates an I/O
subsystem, call service support.
20D0 9007 Invalid subsystem machine type and model
information in VPD
1. If the location code starts with U1.17 or
U1.18, the problem is in the system VPD
module on the media subsystem operator
panel. Replace the operator panel; do not
swap the old VPD module onto the new
operator panel. Call service support for
instructions on programming the VPD
information into the new VPD module.
2. If the location code indicates an I/O
subsystem, call service support.
20D0 9008 Invalid subsystem serial number found in VPD 1. If the location code starts with U1.17 or
U1.18, the problem is in the system VPD
module on the media subsystem operator
panel. Replace the operator panel; do not
swap the old VPD module onto the new
operator panel. Call service support for
instructions on programming the VPD
information into the new VPD module.
2. If the location code indicates an I/O
subsystem, call service support.
20D1 0001 Failed to send state-change message to
service processor
1. Check for system firmware updates. Apply
update if available.
2. Contact your next level of support for
assistance.
20D1 0002 Failed to disable heartbeat alarm
1. Check for system firmware updates. Apply
update if available.
2. Contact your next level of support for
assistance.
Chapter 5. Error Code to FRU Index
419
Summary of Contents for pSeries 670
