Error Code Description
Action/
Possible Failing FRU
406A 0A06 Reboot message (run-time array gard failure)
for processor 3
Reboot the system in slow mode. Run
diagnostics, then go to MAP 0235 in the .Array
bit steering, which is a function in the firmware,
may be able to correct this problem without
replacing hardware.
If AIX is available on the system, go to MAP
0235 in the
RS/6000 and
Eserver
pSeries
Diagnostic Information for Multiple Bus
Systems
, order number SA38-0509.
If Linux is the only operating system on the
system, schedule deferred maintenance with
the customer. When it is possible to reboot the
system, do the following:
1. Using the service processor’s system power
control menu, disable fast mode boot.
(Disabling fast mode automatically enables
slow mode.)
2. Boot the AIX diagnostic CD-ROM.
3. Run diagnostics in problem determination
mode. If no errors are recorded against any
of the processors (devices with a resource
name of proc
x
), array bit steering was
successful and the problem has been
corrected.
If errors are reported against the hardware,
follow the actions for the error code or SRN.
406A 0B00 Self-tests detected fault in I/O book (slot 0 RIO
port 0)
1. Check for system firmware updates.
2. Check the I/O cabling between the primary
I/O book and the I/O subsystems.
3. Primary I/O book
Location: U1.18-P1-H2
4. Call service support.
406A 0B01 Self-tests detected fault in I/O book (slot 0 RIO
port 1)
1. Check for system firmware updates.
2. Check the I/O cabling between the primary
I/O book and the I/O subsystems.
3. Primary I/O book
Location: U1.18-P1-H2
4. Call service support.
406A 0B02 Self-tests detected fault in I/O book (slot 0 RIO
port 2)
1. Check for system firmware updates.
2. Check the I/O cabling between the primary
I/O book and the I/O subsystems.
3. Primary I/O book
Location: U1.18-P1-H2
4. Call service support.
Chapter 5. Error Code to FRU Index
529
Summary of Contents for pSeries 670
