IBM pSeries 670, Service Manual

Page: 993 / 1032

Note: Some older modems do not respond to the X0 or &R1 commands. Edit out these commands
from the modem configuration file if yours is such a modem. See your modem manual for more
information.
Some modems, such as the IBM 7857-017, are not designed for the paging function. Although they can be
used for paging, they return an error message when they do not get the expected response from another
modem. Therefore, even though the paging was successful, the error message causes the service
processor to retry, continuing to place pager calls for the number of retries specified in the Call-Out Policy
Setup Menu. These retries result in redundant pages.
Examples for Using the Generic Sample Modem Configuration Files
The following table contains information to help you determine which modem configuration file to use with
various modems.
Modem Setup Z Setup Z0
(Rare)
Setup F Setup F0 Setup F1
AT&T DataPort 2001 (Ring
interrupt only on first ring)
X
Bocamodem 1440E X
Hayes Smart Modem 300 X
IBM 5841 X
IBM 5843 X
IBM 7851 X
IBM 7852-10 X
IBM 7855 X
USRobotics 36.6K Sportster X
Zoom V.32 X
Appendix D. Modem Configurations
973