IBM pSeries 670, Service Manual

Page: 399 / 1032

Error Code Description Action/
Possible Failing FRU
101B CE16 BPC-BPC communication failure
1. Check the cable between the two BPCs;
reseat and look for bent pins.
2. Replace BPC-A, location: U1.35-P1-X4
3. Replace BPC-B, location: U1.35-P2-X4.
101B D216 BPA-BPA communication failure Go to “MAP 1520: Power” on page 144 for
isolation.
101B D616 Problem with external UPS: utility failure
1. Verify the cabling between the UPS and the
BPCs.
2. Refer to the manufacturer’s documentation
for the UPS.
3. Call service support.
101B D716 Problem with external UPS: battery low
1. Verify the cabling between the UPS and the
BPCs.
2. Refer to the manufacturer’s documentation
for the UPS.
3. Call service support.
101B D716 Informational message about the IBF. Informational message.
101B D766 Informational message about the IBF. Informational message.
101B D776 Informational message about the IBF. Informational message.
101B D816 External UPS: bypass active (informational
message)
Informational message. If a problem is
suspected:
1. Verify the cabling between the UPS and the
BPCs.
2. Refer to the manufacturer’s documentation
for the UPS.
3. Call service support.
101B D916 External UPS: power restored (informational
message)
Informational message. If a problem is
suspected:
1. Verify the cabling between the UPS and the
BPCs.
2. Refer to the manufacturer’s documentation
for the UPS.
3. Call service support.
101B DA16 External UPS: installed (informational message) Informational message. If a problem is
suspected:
1. Verify the cabling between the UPS and the
BPCs.
2. Refer to the manufacturer’s documentation
for the UPS.
3. Call service support.
101B DB16 Problem with external UPS: UPS not available
1. Verify the cabling between the UPS and the
BPCs.
2. Refer to the manufacturer’s documentation
for the UPS.
3. Call service support.
Chapter 5. Error Code to FRU Index
379