Table 2. Firmware Checkpoints (continued)
Checkpoint
Description
Action/
Possible Failing FRU
E1D4
Create SCSI byte device node (ST)
Go to “MAP 1540: Problem Isolation
Procedures” on page 253.
E1DB
Create floppy controller (FDC) node
Go to “MAP 1540: Problem Isolation
Procedures” on page 253.
E1DC
Dynamic console selection.
1. If a console is attached, but nothing is
displayed on it, go to
″
All display
problems
″
in the Entry MAP.
2. If selection screens can be seen on the
terminals and the appropriate key on
the input device is pressed within 60
seconds but there is no response to the
keystroke:
a. If selecting the console with a
keyboard attached to a USB card,
replace the keyboard, then replace
the USB card.
b. If selecting the console with an
ASCII terminal, suspect the
terminal. Use the problem
determination procedures for the
terminal.
Note:
Terminal setting should be:
v
9600 baud
v
no parity
v
8 data bits
v
1 stop bit
E1F0
Start O.B.E.
Go to “MAP 1540: Problem Isolation
Procedures” on page 253.
E1F1
Begin selftest sequence on boot devices.
Go to “MAP 1542: I/O Problem Isolation” on
page 261.
E1F2
Power-on password prompt
The prompt should be visible on the
firmware console (usually a VTERM on the
HMC).
If a console is attached but nothing is
displayed on it, go to the “Entry MAP” on
page 111 with the symptom
″
All display
problems.
″
E1F3
Privileged-access password prompt
The prompt should be visible on the
firmware console (usually a VTERM on the
HMC).
If a console is attached but nothing is
displayed on it, go to the “Entry MAP” on
page 111 with the symptom
″
All display
problems.
″
E1F4
End self-test sequence on boot devices;
begin SMS.
Go to “MAP 1542: I/O Problem Isolation” on
page 261.
E1F5
Build boot device list
Go to “MAP 1542: I/O Problem Isolation” on
page 261.
322
Eserver
pSeries 670 Service Guide
Summary of Contents for pSeries 670
