Error Code Description
Action/
Possible Failing FRU
25A0 0001 L2 Cache controller failure
Replace the MCM module specified by the
location code.
25A1 0001 L2 Cache SRAM failure
Replace the MCM module specified by the
location code.
25A8 0xxx NVRAM problems
Errors reported against NVRAM can be
caused by low battery voltage and (more
rarely) power outages that occur during
normal system usage. With the exception of
the 25A8 0000 error, these errors are
warnings that the NVRAM data content had to
be reestablished and do not require any FRU
replacement unless the error is persistent.
When one of these errors occurs, any system
customization (for example, boot device list)
information has been lost, the system may
need to be reconfigured.
If the error is persistent, replace the primary
I/O book,
Location: U1.18-P1-H2
25A8 0000 Initialization failed, device test failed
Refer to Action under error code
25A8 0xxx
25A8 0100 NVRAM data validation check failed.
Turn off, turn on system unit and retry the
operation before replacing any system
component.
Refer to Action under error code
25A8 0xxx
25A8 0201 Unable to expand target partition - Saving
configuration variable.
Refer to Action under error code
25A8 0xxx
25A8 0202 Unable to expand target partition - Writing
error log entry.
Refer to Action under error code
25A8 0xxx
25A8 0203 Unable to expand target partition - Writing
VPD data.
Refer to Action under error code
25A8 0xxx
25A8 0210 Setenv/$Setenv parameter error - name
contains a null character.
Refer to Action under error code
25A8 0xxx
25A8 0211 Setenv/$Setenv parameter error - value
contains a null character.
Refer to Action under error code
25A8 0xxx
25A8 0215 NVRAM RIO-USR-select variable not found
Complete the following:
1. Check for platform firmware updates.
Apply if available.
2. Call service support.
Chapter 5. Error Code to FRU Index
431
Summary of Contents for pSeries 670
