HP ProCurve 2610-24, Management And Configuration Manual

Page: 104 / 464

Switch Memory and Configuration
Using the Menu and Web Browser Interfaces To Implement Configuration Changes
N o t e
The only exception to this operation are two VLAN-related parameter changes
that require a reboot—described under “Rebooting To Activate Configuration
Changes” on page 6-12.
Using
Save
and
Cancel
in the Menu Interface
For any configuration screen in the menu interface, the Save command:
1. Implements the changes in the running-config file.
2. Saves your changes to the startup-config file.
If you decide not to save and implement the changes in the screen, select
Cancel to discard them and continue switch operation with the current oper­
ation. For example, suppose you have made the changes shown below in the
System Information screen:
To save and
implement the
changes for all
parameters in this
screen, press the
[Enter]
key, then
press
[S]
(for Save ).
To cancel all
changes, press the
[Enter]
key, then
press
[C]
(for Cancel )
Figure 6-4. Example of Pending Configuration Changes that Can Be Saved or
Cancelled
6-10