Port Status and Basic Configuration
Jumbo Frames
•
This switch only supports revision B and above
transceivers. Check: www.hp.com/rnd/device_help/
2_inform for more info.
•
Self test failure.
•
Transceiver type not supported in this port.
•
Transceiver type not supported in this software
version.
•
Not a ProCurve Transceiver. Please go to:
www.hp.com/rnd/device_help/2_inform for more info.
Web: Viewing Port Status and Configuring Port
Parameters
In the web browser interface:
1. Click on the
Configuration
tab.
2. Click on
Port Configuration
.
3. Select the ports you want to modify and click on
Modify Selected Ports
.
4. After you make the desired changes, click on
Apply Settings
.
Note that the web browser interface displays an existing port trunk group.
However, to configure a port trunk group, you must use the CLI or the menu
interface. For more on this topic, see Chapter 12, “Port Trunking” .
Jumbo Frames
Feature
Default
Menu
CLI
Web
display VLAN jumbo status
n/a
—
10-20
—
configure jumbo VLANs
Disabled
—
10-22
—
The
Maximum Transmission Unit
(MTU) is the maximum size IP frame the
switch can receive for Layer 2 frames inbound on a port. The switch drops any
inbound frames larger than the MTU allowed on the port. On ports operating
at 10 Mbps or 100 Mbps, the MTU is fixed at 1522 bytes. However, ports
operating at 1 Gbps or 10 Gbps speeds accept forward frames of up to 9220
bytes (including four bytes for a VLAN tag) when configured for jumbo traffic.
10-17
Summary of Contents for ProCurve 2610-24
