Fluorolog-3 v. 2.2 (9 Aug 2002)
TRIAX operation with the Fluorolog
®
-3
14-8
Note:
The exit slit-width pa-
rameter is valid only for PMT
users. For CCD detectors,
there is no slit at the exit of
the TRIAX, so any displayed
settings are superfluous.
Note:
A CCD is
mounted on the
side (lateral)
exit, while a
PMT is mounted
on the front exit.
Adjusting slit widths
1
Click on an
icon of a
slit.
The
Slits
window
opens. All slits in the TRIAX are adjustable, no matter which slit you click.
2
Enter the desired
slit width.
In bandpass units (e.g.,
nanometers), all slits have the
same setting.
3
Click Move All.
This implements the change.
4
Click Close.
The
Slits
dialog box closes.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
