manualshive.com logo in svg

horiba Fluorolog-3, Operation Manual

Share
Download
horiba Fluorolog-3 Operation Manual Download Page 114

Fluorolog-3 v. 2.2 (10 Sep 2002) 

Components & Accessories 

 

6-26

F-3005/6 Autotitration Injector 

For controlled, automatic injection of aliquots into the sample of your choice, the F-
3005/6 Autotitration Injector is just the thing, available in both 110-V (F-3005) and 
220-V (F-3006) models. The F-3005/6 comes with dual syringes, for complete control 
over dispensing and aspirating volumes of liquids into and out of the sample cell. A 
mix function is included. With the injector come 18-gauge Teflon

®

 tubing and two sy-

ringes (1 mL and 250 µL). The syringes are interchangeable; aliquot size is controllable 
to 0.1% of total syringe volume. 
 

 

F-3005/6 AutoTitrator Injector. 

 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Fluorolog-3

















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands