Display Example 1: Bluetooth low energy Access Address selected
Figure 4.26 - Front Display: Filtered on Access Address 0x8e89bed6
In the figure above is an example Bluetooth low energy data set connection filtered on Access Address =
0x8e89bed6. The Frame Display in the front is the filtered data set. One way to note the difference between
the original and the filtered display is to observe the Protocol Tabs. In the filtered display there are four low
energy protocol tabs as compared to nine in the original display. This access address connection is not using
five of the protocols.
From any open Frame display the user can set another Connection Filter based on the original data set.
Display Example 2: All 802.11 data filtered in
In this example, there is a capture file with Classic
Bluetooth
,
Bluetooth
low energy, and 802.11. To view just
the 802.11 data set, 802.11 = All is selected from the right-click pop up menu.
TELEDYNE LECROY
Chapter 4 Capturing and Analyzing Data
70
Frontline BPA low energy Hardware & Software User Manual
Summary of Contents for BPA LOW ENERGY
Page 1: ...Hardware and Software User Manual Revision Date 1 3 2017...
Page 222: ......
