Save the Stack
1. Click the Add To Predefined List button.
2. Give the stack a name, and click Add.
In the future, the stack appears in the
Protocol Stack List
on the first screen of the Protocol Stack wizard.
Remove a Stack
1. Select it in the first screen and click Remove Selected Item From List.
2. If you remove the stack, you must to recreate it if you need to use it again.
Note:
If you do not save your custom stack, it does appear in the predefined list, but
applies to the frames in the current session. However, it is discarded at the end of the
session.
4.2.3 Reframing
If you need to change the protocol stack used to interpret a capture file and the framing is different in the
new stack, you need to reframe in order for the protocol decode to be correct. You can also use
Reframe
to
frame unframed data. The original capture file is not altered during this process.
Note:
You cannot reframe from the Capture File Viewer .
To reframe your data, load your capture file, select a protocol stack, and then select
Reframe
from the
File
menu on the
Control
window.
Reframe
is only available if the frame recognizer used to capture the data is
different from the current frame recognizer.
In addition to choosing to
Reframe
, you can also be prompted to Reframe by the Protocol Stack Wizard.
1. Load your capture file by choosing
Open
from the
File
menu on the
Control
window, and select the
file to load.
2. Select the protocol stack by choosing
Protocol Stack
from the
Options
menu on the
Control
window, select the desired stack and click
Finish
.
3. If you selected a protocol stack that includes a frame recognizer different from the one used to
capture your data, the
Protocol Stack Wizard
asks you if you want to reframe your data. Choose
Yes
.
4. The analyzer adds frame markers to your data, puts the framed data into a new file, and opens the
new file. The original capture file is not altered.
See
for instructions on removing framing from data.
4.2.4 Unframing
This function removes start-of-frame and end-of-frame markers from your data. The original capture file is
not altered during this process. You cannot unframe from the Capture File Viewer (accessed by selecting
Capture File Viewer or Load Capture File to start the software and used only for viewing capture files).
TELEDYNE LECROY
Chapter 4 Capturing and Analyzing Data
36
Frontline BPA low energy Hardware & Software User Manual
Summary of Contents for BPA LOW ENERGY
Page 1: ...Hardware and Software User Manual Revision Date 1 3 2017...
Page 222: ......
