Figure 3.8 - Select
Set Initial Decoder Parameters...
from
Control
window
The
Set Initial Decoder Parameters
window opens with a tab for each decoder that requires
parameters.
Figure 3.9 - Tabs for each decoder requiring parameters.
l
Each entry in the
Set Initial Decoder Parameters
window takes effect from the beginning of the
capture onward or until redefined in the
Set Subsequent Decoder Parameters
dialog.
Override Existing Parameters
The
Set Subsequent Decoder Parameters
dialog allows the user to override an existing parameter at any
frame in the capture where the parameter is used.
If you have a parameter in effect and wish to change that parameter
l
Select the frame where the change should take effect
l
Select
Set Subsequent Decoder Parameters...
from the
Options
menu, and make the needed
changes. You can also right-click on the frame to select the same option.
TELEDYNE LECROY
Chapter 3 Configuration Settings
20
Frontline BPA low energy Hardware & Software User Manual
Summary of Contents for BPA LOW ENERGY
Page 1: ...Hardware and Software User Manual Revision Date 1 3 2017...
Page 222: ......
