FrontLine BPA LOW ENERGY, Hardware User Manual

Page: 18 / 228

Mode Selection
Hot-
Key
Description
Live &
Capture
File
Hardware Settings
0 - Classic
1 - Bluetooth low energy
I/O Settings 0 - Classic
1 - Bluetooth low energy
System Settings
Alt-
Enter Opens the System Settings dialog for configuring capture
files.
Directories...
Opens the
File Locations dialog
where the user can change
the default file locations.
Check for New
Releases at Startup
When this selection is enabled, the program automatically
checks for the latest Frontline protocol analyzer software
releases.
Side Names... Opens the Side Names dialog used to customize the
names of the slave and master wireless devices.
Protocol Stack...
Opens the
Select a Stack dialog
where the user defines the
protocol stack they want the analyzer to use when
decoding frames.
Set Initial Decoder
Parameters...
Opens the
Set Initial Decoder Parameters window
. There
may be times when the context for decoding a frame is
missing. For example, if the analyzer captured a response
frame, but did not capture the command frame, then the
decode for the response may be incomplete. The Set Initial
Decoder Parameters dialog provides a means to supply the
context for any frame. The system allows the user to define
any number of parameters and save them in templates for
later use.Each entry in the window takes effect from the
beginning of the capture onward or until redefined in the Set
Subsequent Decoder Parameters dialog. This selection is
not present if no decoder is loaded that supports this
feature.
Set Subsequent
Decoder
Parameters...
Opens the
Set Subsequent Decoder Parameters dialog
where the user can override an existing parameter at any
frame in the capture. Each entry takes effect from the
specified frame onward or until redefined in this dialog on a
later frame. This selection is not present if no decoder is
loaded that supports this feature.
Automatically
Request Missing
Decoder
Information
When checked, this selection opens a dialog that asking for
missing frame information. When unchecked, the analyzer
decodes each frame until it cannot go further and it stops
decoding. This selection is not present if no decoder is loaded
that supports this feature.
Enable/Disable
Audio Expert
System
When enabled, the
Audio Expert System
is active, other
wise it is not available. Only available when an Audio
Expert System licensed device is connected.
Table 2.5 - Control Window Live Menu Selections (continued)
Chapter 2 Getting Started TELEDYNE LECROY
Frontline BPA low energy Hardware & Software User Manual 11