FrontLine BPA LOW ENERGY, Hardware User Manual

Page: 89 / 228

l
Segments are "pieces" of the timeline. You can zoom in to show just one segment, or you can zoom
out to show multiple segments. In multiple segment displays the segments are contiguous from top to
bottom. Refer to the diagram below. The top-most segment contains the beginning timestamp on the
left. The timeline proceeds from left to right in a segment, and continues in the next segment down
beginning on the left of that segment. If you zoom out to show two segments the viewable timeline
appears in those two segments. You will use the scroll bar on the right to scroll through the timeline.
In a one-segment display the viewable timeline appears in that one segment. You will scroll through
the timeline using the scroll bar appearing at the bottom of the timeline display.
l
Rows show either the access address of the configured devices or of all discovered devices. Because
the segments are contiguous in multiple segment displays, the rows in each segment are identical.
In the following diagram we see a three segment display showing the timeline flow.
Figure 4.34 - Diagram of low energy Timeline Flow with Segment and Row Relationship
l
Rows can display either source device access addresses or the three radios receiving the data..You choose
with methods by selecting
Show Device Address Rows or Show Radio Rows from the Format
menu.
Show Device Address Rows
will display rows of
packets from sending devices. The source device address
will appear on the left of each row.
Show Radio Rows
will display rows packets received
on radios 0,1, or 2. The radio number will appear on the
left of each row.
o
The Addr rows display packets sent by that access address for all devices or configured devices. You
select All Devices or Configured Devices using the radio buttons.The address shown is the access
address for the device.
TELEDYNE LECROY Chapter 4 Capturing and Analyzing Data
82 Frontline BPA low energy Hardware & Software User Manual