1. Select the frame where the change should take effect,
and select
Set Subsequent Decoder Parameters
from the
Options
menu, or by selecting a frame in the
frame display and choosing from the right-click pop-up
menu, and make the needed changes.
2. Change the RFCOMM parameter by selecting from the
Change the Selected Item to Carry
drop down list.
3. If you wish to remove an overridden rule click on
Remove Override
button. If you want to remove all
decoder parameter settings click on
Remove All
.
4. Choose the protocol the selected item carries from the
drop-down list, and click
OK
.
Each entry in the
Set Subsequent Decoder Parameters
dialog takes effect from the specified frame onward or until
redefined in this dialog on a later frame.
Figure 3.17 - Set Subsequent Decoder Parameters selection list
Note:
If the capture has no user defined overrides, then the system displays a dialog
stating that no user defined overrides exist.
TELEDYNE LECROY
Chapter 3 Configuration Settings
28
Frontline BPA low energy Hardware & Software User Manual
Summary of Contents for BPA LOW ENERGY
Page 1: ...Hardware and Software User Manual Revision Date 1 3 2017...
Page 222: ......
