FrontLine BPA LOW ENERGY Hardware User Manual Download Page 73

Page: 73 / 228

Figure 4.21 - Rename Filters Dialog

2. Select the filter to be renamed from the combo box.

3. Enter a new name for the filter in the

New Name

box. Optionally click the

Apply

button and the new

name will appear in the

Filters

combo box and the

New Name

box will empty. This option allows

you to rename several filters without closing the

Rename Filter

dialog each time.

4. Click

. The

Rename Filter

dialog box closes and the system renames the filter.

4.3.1.13.2 Connection Filtering

Connection Filtering allows the user to view a subset of the total available packets within the

Frame Display

The subset can include data from a single

Bluetooth

connection, or all of the BR/EDR packets, all of the low

energy packets, all of the 802.11 packets, or all of the HCI packets.

Bluetooth Applicability

A connection (device pair) is identified by

1. A Link for Classic

Bluetooth

2. An Access Address for

Bluetooth

low energy.

The link ID is a number that the ComProbe software assigns to identify a pair of devices in a BR/EDR
connection. In the

Frame Display

details pane, the Baseband layer contains the link ID field if the field’s

value is not 0.

An Access Address is contained in every

Bluetooth

low energy packet. The Access Address identifies a

connection between a slave and a master or an advertising packet.

Connection filtering displays only the frames, protocols, summary, details, and events for the selected
connections.

Note:

Connection Filters are not persistent across sessions.

4.3.1.13.2.1 Creating a Connection Filter

In the Frame Display there are four ways to create a connection filter.

From the Frame Display Filter menu

Click on the

Frame Display Filter

Connection Filter

selection. From the drop down menu, select

Classic

Bluetooth low energy

. The options are

Classic

Bluetooth

All

will filter in all Classic

Bluetooth

frames. You are in effect filtering out any

Bluetooth

low energy

frames and are selecting to filter in all the Classic

Bluetooth

links.

TELEDYNE LECROY

Chapter 4 Capturing and Analyzing Data

Frontline BPA low energy Hardware & Software User Manual

Summary of Contents for BPA LOW ENERGY





































































































































































































































Search results

Summary of Contents for BPA LOW ENERGY

Reviews:

Related manuals for BPA LOW ENERGY

Brands by name

Popular brands

FrontLine BPA LOW ENERGY, Hardware User Manual

Search results

Summary of Contents for BPA LOW ENERGY

Reviews:

Related manuals for BPA LOW ENERGY

Brands by name

Popular brands