When you move the mouse
over the message description
you see an expanded tool tip.
If you position the cursor
outside of the message box, the
tool tip will only display for a
few seconds.
If, however, you position the
cursor within the tool tip box,
the message will remain until you move the cursor out of the box.
Additionally, If you right click on a message description, you will see the select Show all Layers button.
When you select
Show all Layers
, the chart will display all the messaging layers.
The
Frame#
and
Time
of the packets are displayed on the left side of the chart.
Figure 4.88 - Frame# and Time Display, inside red box.
If you click on the description of the message interaction, the corresponding information is highlighted in
.
Figure 4.89 - MSC Synchronization with Frame Display
How do I navigate in the dialog?
You can use the navigation arrows at the bottom and the right side of the dialog to move vertically and
horizontally. You can also click and hold while moving the pointer within dialog that brings up a directional
arrow that you can use to move left/right and up/down.
TELEDYNE LECROY
Chapter 4 Capturing and Analyzing Data
120
Frontline BPA low energy Hardware & Software User Manual
Summary of Contents for BPA LOW ENERGY
Page 1: ...Hardware and Software User Manual Revision Date 1 3 2017...
Page 222: ......
