Figure 5.11 - Find Bookmark tab.
There are several ways to locate bookmarks.
l
Select the bookmark you want to move to and click the
Go To
button.
l
Simply double-click on the bookmark.
l
Click the
Move Forward
and
Move Back
buttons to move through the frames to the bookmarks shown
in the window. When the bookmark is found it is highlighted in the window.
There are three ways to modify bookmarks:
1. Click on
Delete
to remove the selected bookmark.
2. Click on
Modify...
to change the selected Bookmark name.
3.
Remove All
will delete all bookmarks in the window.
The
Find
window
Bookmark
tab will also appear when using functions other than
Find
such as when
clicking on the Display All Bookmarks
icon.
5.1.9 Changing Where the Search Lands
When doing a search in the analyzer, the byte or bytes matching the search criteria are highlighted in the
Event Display
. The first selected byte appears on the third line of the display.
To change the line on which the first selected byte appears:
1.
Open fts.ini (located in the C:\User\Public\Public Documents\Frontline
Test Equipment\)
2. Go to the [CVEventDisplay] section
3. Change the value for SelectionOffset.
4. If you want the selection to land on the top line of the display, change the SelectionOffset to 0 (zero).
5.1.10 Subtleties of Timestamp Searching
Timestamping can be turned on and off while data is being captured. As a result, the capture buffer may have
some data with a timestamp, and some data without. When doing a search by timestamp, the analyzer ignores
TELEDYNE LECROY
Chapter 5 Navigating and Searching the Data
160
Frontline BPA low energy Hardware & Software User Manual
Summary of Contents for BPA LOW ENERGY
Page 1: ...Hardware and Software User Manual Revision Date 1 3 2017...
Page 222: ......
