4.5.7.2 Switching Between Hex, Decimal, Octal or Binary
On the Event Display window the analyzer displays data in Hex by default. There are several ways to change
the
radix
1
used to display data.
Go to the
Format
menu and select the radix you want. A check mark next to the radix indicates which set is
currently being used.
Figure 4.105 - Format Menu
1. Right-click on the data display header labels and choose a different radix.
Figure 4.106 - Header labels, right click
2. Or right-click anywhere in the data display and select a different radix.
Figure 4.107 - Data display right click menu
If you want to see only the numerical values, click on the
Numbers Only
icon
on the
Event Display
toolbar.
1
The base of a number system. Binary is base 2, octal is base 8, decimal is base 10 and hexadecimal is base 16.
TELEDYNE LECROY
Chapter 4 Capturing and Analyzing Data
138
Frontline BPA low energy Hardware & Software User Manual
Summary of Contents for BPA LOW ENERGY
Page 1: ...Hardware and Software User Manual Revision Date 1 3 2017...
Page 222: ......
