FrontLine BPA LOW ENERGY, Hardware User Manual

Page: 160 / 228

5.1.5 Searching for Special Events
Frontline inserts or marks events other than data bytes in the data stream. For example, the analyzer inserts
start-of-frame and end-of-frame markers into framed data, marking where each frame begins and ends. If a
hardware error occurs, the analyzer shows this using a special event marker. You can use Find to locate single
or multiple special events.
To access the search for special events function:
1. Open a capture file to search.
2. Open the
Event Display or Frame Display window.
3. Click on the
Find icon or choose Find from the Edit menu.
4. Click on the
Special Events
tab of the Find dialog.
Note: The tabs displayed on the Find dialog depend on the product you are running
and the content of the capture file you are viewing.
Figure 5.8 - Find Special Events tab
5. Check the event or events you want to look for in the list of special events. Use Check All or
Uncheck All buttons to make your selections more efficient.
6. Click Find Next and Find Previous to move to the next instance of the event.
Not all special events are relevant to all types of data. For example, control signal changes are relevant only to
serial data and not to Ethernet data.
For a list of all special events and their meanings, see List of all Event Symbols on page 139 .
Chapter 5 Navigating and Searching the Data TELEDYNE LECROY
Frontline BPA low energy Hardware & Software User Manual 153