Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 1480 / 2620

1480 ExtremeWare 7.7 Command Reference Guide
EAPS Commands
Hello Timer interval: 1 sec Fail Timer interval: 3 sec
Preforwarding Timer interval: 3 sec
Last update: From Master Id 00:01:30:B9:4B:E0, at Tue May 6 12:49:25 2003
Eaps Domain has following Controller Vlan:
Vlan Name VID QosProfile
“rhsc” 0020 QP8
EAPS Domain has following Protected Vlan(s):
Vlan Name VID
“traffic” 1001
Number of Protected Vlans: 1
The following command displays EAPS information:
show eaps eaps2
The results for a transit node are shown as follows:
Name: "eaps2" (instance=1)
State: Link-Down [Running: Yes]
Enabled: Yes Mode: Transit
Primary port: 3 Port status: Down Tag status: Tagged
Secondary port: 2 Port status: Up Tag status: Tagged
Hello Timer interval: 1 sec Fail Timer interval: 3 sec
Preforwarding Timer interval: 6 sec
Last update: From Master Id 00:01:30:B9:4B:E0, at Tue May 6 12:49:25 2003
EAPS Domain has following Controller Vlan:
Vlan Name VID QosProfile
"cv2" 4002 QP8
Number of Protected Vlans: 2
The following command displays summary EAPS information:
show eaps summary
The results for this command are as follows:
EAPS Enabled: Yes
Number of EAPS instances: 1
EAPSD-Bridge links: 2
Pri Sec Vlan
Domain State Mo En Port Port Control-Vlan (VID)Count
------------ ------------ -- -- ------- ------- -----------------------
eaps1 Complete M Y 1 2 cv1 (1001) 1
History
This command was first available in ExtremeWare 6.2.
The
summary
option was added in ExtremeWare 6.2.2.
This command was modified in ExtremeWare 7.1 to display primary and secondary ring-ports and
show the status of the failtimer.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.1e.