Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 2398 / 2620

2398 ExtremeWare 7.7 Command Reference Guide
Power Over Ethernet Commands—Summit 300 and 400-24p Switches and Alpine PoE Module
show inline-power stats ports
show inline-power stats ports <portlist>
Description
Displays inline power statistics for the specified ports.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
Default
N/A
Usage Guidelines
The output displays the following inline power statistics for the specified ports:
• State—Displays the inline power state:
— Disabled
— Searching
— Discovered
— Delivering
— Faulted
— Disconnected
— Other
— Denied
• Class—Displays the class type:
— “-----”: disabled or searching
— “class0”: class 0 device
— “class1”: class 1 device
— “class2”: class 2 device
— “class3”: class 3 device
— “class4”: class 4 device
• Absent—Displays the number of times the port was disconnected.
• InvSig—Displays the number of times the port had an invalid signature.
• Denied—Displays the number of times the port was denied.
• Over-current—Displays the number of times the port entered an over-current state.
portlist Specifies one or more slots and ports. May be in the form 1:1,1: 1:2, 1:3-1:5 2:*, 2:5, 2:6-2:8.