Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 2276 / 2620

2276 ExtremeWare 7.7 Command Reference Guide
High-Density Gigabit Ethernet Commands—Alpine 3800 and BlackDiamond 6800 Series Only
unconfigure diffserv ingress replacement ports
unconfigure diffserv ingress replacement ports [<portlist> | all]
Description
Resets the optional overwriting of the DiffServ code point portion of the IP TOS field for ingress traffic
to its defaults.
Syntax Description
Default
N/A
Usage Guidelines
Use this command to reset the low-priority and high-priority code point values to 0 and to disable
DiffServ ingress replacement.
Example
The following command resets the DiffServ code points to their defaults:
unconfigure diffserv ingress replacement ports all
History
This command was first available in ExtremeWare 7.1.
Platform Availability
This command is available on “3” series I/O modules only.
portlist Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
all Specifies all
“3”
series ports.