Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 1017 / 2620

download ssl privkey
ExtremeWare 7.7 Command Reference Guide 1017
download ssl privkey
download ssl <ip address> privkey <key file>
Description
Permits downloading of a private key from files in a TFTP server.
NOTE
This command is available only for the Alpine 3800 and Summit 300 switches.
Syntax Description
Default
N/A
Usage Guidelines
When this command is executed, if the private key is encrypted, the user is prompted to enter the
passphrase that was used to encrypt the private key when the private key was generated. Only DES
and 3DES encryption mechanisms are supported for private key encryption. If the download operation
is successful the existing private key is overwritten.
After the download is successful, a check is performed to find out whether the private key downloaded
matches the public key stored in the certificate. If they do not match, a warning message is displayed
(“Warning: The Private Key does not match with the Public Key in the certificate.”). This warning is a
reminder to the user to download the corresponding certificate.
The certificate and private key file should be in PEM format and generated using RSA as the
cryptography algorithm.
Example
The following command enables downloading of a private key from a TFTP server:
download ssl 166.81.0.14 privkey t00Ts1e
History
This command was first available in ExtremeWare 6.2a.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.3e; it was added to
the “ i ” series of switches in ExtremeWare 7.3.0.
ip address Specifies the IP address of the TFTP server.
key file Specifies the name of private key file.