Extreme Networks ExtremeWare 7.7 Command Reference Manual Download Page 371

Page: 371 / 2620

configure mac-vlan delete

ExtremeWare 7.7 Command Reference Guide

371

configure mac-vlan delete

configure mac-vlan delete [all | mac-address [<mac_address> | any]]

Description

Removes a MAC address from any MAC-based VLANs with which it was associated.

Syntax Description

Default

Usage Guidelines

None

Examples

The following command removes the end-station with MAC address 00:00:00:00:00:02 from participating
in any MAC-based VLANs.

configure mac-vlan delete mac-address 00:00:00:00:00:02

The following command removes all MAC addresses from participating in any VLANs:

configure mac-vlan delete all

History

This command was first available in ExtremeWare 6.0.

This command was added to the Summit “

” series of switches in ExtremeWare 7.2e.

Platform Availability

This command is available on all platforms.

all

Indicates that all MAC addresses should be removed from all VLANs.

mac_address

The MAC address to be removed. Specified in the form

nn:nn:nn:nn:nn:nn

mac-address any

will match all the source MAC addresses that are not matched by specific

MAC addresses given for the MAC group.

Summary of Contents for ExtremeWare 7.7





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.7

Reviews:

Related manuals for ExtremeWare 7.7

Brands by name

Popular brands

Extreme Networks ExtremeWare 7.7, Command Reference Manual

Search results

Summary of Contents for ExtremeWare 7.7

Reviews:

Related manuals for ExtremeWare 7.7

Brands by name

Popular brands