Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 1193 / 2620

configure debug-trace ipxgns-message
ExtremeWare 7.7 Command Reference Guide 1193
configure debug-trace ipxgns-message
configure debug-trace ipxgns-message <debug level> vlan <vlan name>
Description
This command records debug information to the syslog.
NOTE
This command is available only on the “i” series switches.
Syntax Description
Default
The default level is 0.
Usage Guidelines
The
debug level
range is 0 to 5. Higher levels record more verbose messages. Higher levels also
record the messages recorded at lower levels.
Example
The following command sets the reporting level for IPX GNS message errors to 3:
configure debug-trace ipxgns-message 3
Following is the log output at this level:
<DBUG:XSAP> SAP Traverse: Stuffing entry into packet
<DBUG:XSAP> SAP Traverse: Ignoring type 0278
<DBUG:XSAP> SAP Traverse: Ignoring type 026b
<DBUG:XSAP> SAP Traverse: Ignoring type 0640
<DBUG:XSAP> SAP Traverse: Ignoring type 0278
<DBUG:XSAP> SAP Traverse: Ignoring type 026b
<DBUG:XSAP> SAP Traverse: Ignoring type 0640
<DBUG:XSAP> type 0004 net: 3646f895 mac: 00:90:27:a1:44:3c socket: 1105
<DBUG:XSAP> SAP Traverse: Stuffing entry into packet
<DBUG:XSAP> last message repeated 9 times
<DBUG:XSAP> Rcv bcast GNS type(3) from (f0003606, 00:a0:c9:59:a4:5e) for service=0x4
debug level Specifies a debug level:
0 — None.
1 — None.
2 — Verifies that IPX GNS messages are being sent and received.
3 — Verifies the contents of the messages.
4 — No additional information recorded.
5 — No additional information recorded.
vlan name Specifies a VLAN name.