Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 709 / 2620

configure sflow collector
ExtremeWare 7.7 Command Reference Guide 709
configure sflow collector
configure sflow collector <ip-address> port <udp-port>
Description
Configures the IP address and UDP port number identifying the sFlow collector.
NOTE
This command is available only on the “i” series switches.
Syntax Description
Default
The default UDP port number is 6343
Usage Guidelines
This command allows you to configure where to send the sFlow data. You must specify an IP address
for the sFlow data collector, and a UDP port where the samples will be transmitted to and from the
sFlow agent.
You can configure up to four sFlow collectors. Each unique combination of an IP address and a UDP
port identifies a collector.
Using the
unconfigure sflow collector
command resets the collector parameters to the default.
NOTE
The notation
:
can be used instead of
port
, as in the examples.
Example
The following command specifies that the sFlow agent will send all samples to the collector with the
address 123.123.123.123 and port number 9876:
configure sflow collector 123.123.123.123 port 9876
or
configure sflow collector 123.123.123.123:9876
History
This command was first available in ExtremeWare 7.3.0.
ip-address Specifies the IP address to send the sFlow data.
udp-port Specifies the UDP port number to send the sFlow data.