Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 450 / 2620

450 ExtremeWare 7.7 Command Reference Guide
QoS Commands
disable dlcs
disable dlcs {fast-ethernet-ports | ports [all | <port_number>]}
Description
This command disables Windows internet Naming Service (WINS) snooping for ports on this switch.
NOTE
This command is available only on the “i” series switches.
Syntax Description
Default
Disabled
Usage Guidelines
Disabling DLCS means that DLCS information for this switch will no longer be available to the
ExtremeWare Enterprise Manager Policy System.
Used with no parameters, this command disables WINS packet snooping on all ports on which it was
enabled.
If the command is executed with no parameters the DLCS is disabled only on the system, but not on all
ports.The ports are still dlcs enabled until they are specifically disabled by the
disable dlcs ports
all
or
disable dlcs ports <port number>
command.
Using the
ports
parameter disables WINS packet snooping only on the specified port.
Example
The following command disables all WINS packet snooping on the switch:
disable dlcs
History
This command was available in ExtremeWare 6.0.
The command was modified in ExtremeWare 6.1 to support the
fast-ethernet-ports
parameter.
Platform Availability
This command is available on the “i” series platforms only.
fast-ethernet-ports Specifies that WINS packet snooping should be disabled on all Fast Ethernet ports.
all All specifies that WINS packet snooping should be disabled on all ports.
port_number Specifies a port on which WINS packet snooping should be disabled.