Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 742 / 2620

742 ExtremeWare 7.7 Command Reference Guide
Commands for Status Monitoring and Statistics
disable flowstats ports
disable flowstats ports <portlist>
Description
Disables the flow statistics function on the specified ports.
NOTE
This command is available only on the “i” series switches.
Syntax Description
Default
N/A
Usage Guidelines
On the PoS module, flow statistics are collected only on SONET ports that are configured to use the IP
control protocol IPCP. (In other words, flow statistics are not collected on ports that are configured to
use the bridging control protocol BCP.) Also, there are no configuration restrictions that prohibit
enabling of the flow statistics function on ports that are not configured to use IPCP; statistics are not
collected on those ports.
Example
The following command disables NetFlow statistics for ports 1-8 on this switch:
disable flowstats ports 1-8
History
This command was first available in ExtremeWare 6.1.5b20 for the PoS module
This command was modified in ExtremeWare 6.2 to support all “ i ” series platforms.
Platform Availability
This command is available only on the “i” series platforms.
portlist Specifies a list of ports or slots and ports for which the flowstats function should be disabled. May be
in the form 1, 2, 3-5, 2:5, 2:6-2:8.