Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 1162 / 2620

1162 ExtremeWare 7.7 Command Reference Guide
Configuration and Image Commands
use configuration
use configuration [primary | secondary]
Description
Configures the switch to use a previously saved configuration on the next reboot.
Syntax Description
Default
N/A
Usage Guidelines
The keyword
configuration
can be abbreviated to
config
.
To view information about the configuration selected for the next reboot, use the
show switch
command.
Example
The following command specifies that the next reboot should use the primary saved configuration:
use configuration primary
History
This command was available in ExtremeWare 2.0.
Support for the
slot
parameter was introduced in ExtremeWare 7.0.0. The
<slot>
parameter is
applicable to the Alpine and BlackDiamond chassis.
Support for the
all
keyword was introduced in ExtremeWare 7.1.0.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.1e.
Support for the
slot
and
all
keywords was removed in ExtremeWare 7.4.
Platform Availability
This command is available on all platforms.
primary Specifies the primary saved configuration.
secondary Specifies the secondary saved configuration.