Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 350 / 2620

350 ExtremeWare 7.7 Command Reference Guide
Commands for Configuring Slots and Ports on a Switch
show ports vlan info
show ports <portlist> | vlan <vlan_name> vlan info
Description
Displays port VLAN information.
Syntax Description
Default
N/A
Usage Guidelines
None
Example
The following command displays VLAN information for port 2:
show ports 2 vlan info
The following is the output from this command:
Port 2
Name VID Protocol Addr Flags Proto Ports
v1 4093 ------------------ -------- ANY 2/2
#
#
Flags: (C) Domain-masterVlan, (c) Domain-memberVlan, (d) DVMRP Enabled
(E) ESRP Slave, (f) IP Forwarding Enabled, (G) GVRP Enabled
(i) ISIS Enabled, (I) IP Forwarding lpm-routing Enabled
(L) Loopback Enabled, (M) ESRP Master, (m) IPmc Forwarding Enabled
(N) GNS Reply Enabled, (o) OSPF Enabled (P) IPX SAP Enabled
(p) PIM Enabled, (R) SubVLAN IP Range Configured, (r) RIP Enabled
(S) SuperVlan, (s) SubVlan, (T) Member of STP Domain
(v) VRRP Enabled, (V) VPLS/TLS Enabled, (X) IPX RIP Enabled
(Z) Translation-Vlan, (z) Member-Vlan
(2) IPX Type 20 Forwarding Enabled
History
This command was first available in ExtremeWare 7.3.0 and ExtremeWare 7.3e.
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the
form 1, 2, 3-5, 1:*, 1:5, 1:6-1:8.
vlan_name Specifies to display VLAN information from the VLAN with this name.