Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 685 / 2620

configure log filter events
ExtremeWare 7.7 Command Reference Guide 685
configure log filter myFilter add events bgp.keepalive severity error only
then the following exclude item actually results in no change to the filter item list:
configure log filter myFilter add exclude events bgp.updatein severity all
Since the newly created filter called myFilter only includes some items from the subcomponent
BGP.Keepalive, there are no BGP.UpdateIn events that need to be excluded.
More Information. See the command
show log
on page 791 for more information about severity
levels.
To see a list of the components present in the system, use the following command:
show log components
To see a list of event condition definitions, use the following command:
show log events
To see the current configuration of a filter, use the following command:
show log configuration filter <filter name>
Example
The following command adds all events in the STP.InBPDU component at severity
info
to the filter
called mySTPFilter:
configure log filter myStpFilter add events stp.inbpdu severity info
The following command adds events in the STP.OutBPDU component, at the pre-defined severity level
for that component, to the filter myStpFilter:
configure log filter myStpFilter add events stp.outbpdu
The following command excludes one particular event, STP.InBPDU.Drop, from the filter:
configure log filter myStpFilter add exclude events stp.inbpdu.drop
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.