Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 1428 / 2620

1428 ExtremeWare 7.7 Command Reference Guide
Wireless Commands
show wireless ports interface security-status
show wireless ports [<portlist> | all ] interface [1 |2] security-status
{detail}
Description
Displays Wired Equivalent Privacy
(
WEP) protocol, authentication, dot1x, and ESS name information
for the selected port and interface.
Syntax Description
Default
N/A
Usage Guidelines
Each wireless port on the switch contains two interfaces. Interface 1 supports 802.11a, and interface 2
supports 802.11b/g radio signals. The
show wireless port interface security-status
command
allows you to display security status information about one of the two individual interfaces (1|2) on
one or more ports.
Examples
The following example displays the security setting of all active wireless ports of the switch:
show wireless ports all interface 2 security-status
The output of the command is similar to:
Port Intf Dot11 Auth Network Auth ESS
-------------------------------------------------------------------------------
1:37 2 shared none TFZ
1:38 2 open none fz-open-wep-64
The following example shows the detailed security setting of all active wireless ports of the switch:
show wireless ports all interface 2 security-status detail
The output of the command is similar to:
Wireless Interface: 1:37:2
Dot11 Authentication: shared
Network Authentication: none
ESS Name: TFZ
Encryption: wep128
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
detail Specifies to display the information in detailed format.