Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 372 / 2620

372 ExtremeWare 7.7 Command Reference Guide
VLAN Commands
configure ports monitor vlan
configure ports <portlist> monitor vlan <vlan name>
Description
Configures VLAN statistic monitoring on a per-port basis.
NOTE
This command is available only on the “i” series switches.
Syntax Description
Default
N/A
Usage Guidelines
When per-port monitoring is configured, the
show ports
command displays the latest statistics directly
from the hardware in real time. This information is not logged.
Examples
The following command configures per-port monitoring for a set of ports on slot 8 for the VLAN
named accounting:
configure ports 8:1-8:6 monitor vlan accounting
You can monitor up to four VLANs on the same port by issuing the command four times. For example,
if you want to monitor VLANs dog1, dog2, dog3, and dog4 on slot 1, use the following commands:
configure ports 1:* monitor vlan dog1
configure ports 1:* monitor vlan dog2
configure ports 1:* monitor vlan dog3
configure ports 1:* monitor vlan dog4
After you have configured the ports for monitoring, you can use the
show ports vlan statistics
command to display information for the configured ports:
show ports 1:* vlan statistics
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available only on the “i” series platforms.
portlist Specifies one or more ports. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
vlan name Specifies a VLAN name.