Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 2146 / 2620

2146 ExtremeWare 7.7 Command Reference Guide
ARM Commands—BlackDiamond Switch Only
configure route-map set iphost-routing
configure route-map <route-map> <sequence-number> [add | delete ] set
iphost-routing
Description
Enables or disables Selective-LPM for a specified route-map when the LPM feature is enabled.
Syntax Description
Default
N/A.
Usage Guidelines
This command optionally enables or disables Longest Prefix Match (LPM) for the specified route-map.
This command may be used to override the VLAN lpm-routing
configuration for specific routes. The
iphost-routing
keyword specifies how packets are to be routed for route-map matched IP prefixes.
If the
iphost-routing
property is added to a route-map, packets are forwarded to the IP prefixes’ next
hop using the hardware host-based IP FDB. The
iphost-routing
keyword is only significant for routes
learned on VLANs that are lpm-routing enabled.
Example
This command enables Selective-LPM and specifies IP-host routing on the route map lpm_map :
configure lpm_map 20 add set iphost-routing
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
route-map Specifies a route map name.
sequence-number Specifies a sequence number.
add Specifies to add the statement to the route map.
delete Specifies to delete the statement from the route map.