Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 1630 / 2620

1630 ExtremeWare 7.7 Command Reference Guide
STP Commands
6: p=proposing, a=agree
7: (partner mode) d = 802.1d, w = 802.1w, m = mstp
8: i = edgeport inconsistency
9: B = Boundary, I = Internal
In this command output, the flags specific to MSTP are
Boundary
and
Internal
.
The following command shows detail information for ports on an STPD called cist_stp in a standalone
switch configured with MSTP:
show stpd cist_stp ports detail
The results for this command are as follows:
Stpd: cist_stp Port: 23 PortId: 4017 Stp: ENABLED Path Cost: 19
BPDU Encap: 802.1D Partner STP version: Dot1s
Port State: DISABLED Topology Change : FALSE
Port Priority: 4 Loopback Port: FALSE
Designated Root: 00:00:00:00:00:00:00:00 Designated Cost: 0
Designated Bridge: 00:00:00:00:00:00:00:00 Designated Port Id: 0
maxAge: 0 MsgAge: 0 fwdDelay: 0 HelloTime: 0 maxHops: 0
In this command output, the items specific to MSTP are
Partner STP version
and
maxHops
.
History
This command was first available in ExtremeWare 2.0.
Support for modular switches was introduced in ExtremeWare 4.0.
Support for the
all
keyword was introduced in ExtremeWare 4.0.
Support for the
detail
keyword was introduced in ExtremeWare 6.2 and replaced the
all
keyword.
Support for displaying RSTP data was introduced in ExtremeWare 7.1.
This command was added to the Summit “ e ” series of switches in ExtremeWare 6.2a and
ExtremeWare 7.1e.
Support for the
detail
keyword was introduced in ExtremeWare 7.2e.
Support for the edge safeguard feature was introduced in ExtremeWare 7.5.
Support for MSTP data was introduced in ExtremeWare 7.6.
Platform Availability
This command is available on all platforms.