Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 150 / 2620

150 ExtremeWare 7.7 Command Reference Guide
Commands for Managing the Switch
configure snmpv3 add filter
configure snmpv3 add filter {hex <hex value>} <profile name> subtree
<object identifier> {/<subtree mask>} type [included | excluded] {volatile}
Description
Add a filter to a filter profile.
Syntax Description
Default
The default
mask
value is an empty string (all 1s). The other default value is
non-volatile
.
Usage Guidelines
Use this command to create a filter entry in the snmpNotifyFilterTable. Each filter includes or excludes a
portion of the MIB. Multiple filter entries comprise a filter profile that can eventually be associated with
a target address. Other commands are used to associate a filter profile with a parameter name, and the
parameter name with a target address.
This command can be used multiple times to configure the exact filter profile desired.
Example
Use the following command to add a filter to the filter profile prof1 that includes the MIB subtree
1.3.6.1.4.1/f0 :
configure snmpv3 add filter prof1 subtree 1.3.6.1.4.1/f0 type included
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.2e.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
profile name Specifies the filter profile that the current filter is added to.
object identifier Specifies a MIB subtree.
subtree mask Specifies a hex octet string used to mask the subtree. For example, f7a
indicates 1.1.1.1.0.1.1.1.1.0.1.0.
included Specifies that the MIB subtree defined by <object identifier>/<mask> is to be
included.
excluded Specifies that the MIB subtree defined by <object identifier>/<mask> is to be
excluded.
volatile Specifies volatile storage.