Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 876 / 2620

876 ExtremeWare 7.7 Command Reference Guide
Security Commands
configure enhanced-dos-protect ipfdb agingtime
configure enhanced-dos-protect ipfdb agingtime <aging> ports <portlist>
Description
Configures the aging time on untrusted ports for enhanced denial of service protection.
Syntax Description
Default
The default aging time is 30 seconds.
Usage Guidelines
Use this command to change the aging time values for selected untrusted ports. To verify configuration,
use the
show enhanced-dos-protect
command and view data in the Aging column.
Example
The following command configures the aging time on port 2 to 100 seconds:
configure enhanced-dos-protect ipfdb agingtime 100 ports 2
History
This command was first available in ExtremeWare 7.3.0 and ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
aging Specifies the number of seconds for the aging time per port. The aging value is the software cache
timeout: the duration of time to be considered to reach the threshold. The valid range is 1-300
seconds. The default value is 30 seconds.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and ports.
On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5,
2:6-2:8.