Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 866 / 2620

866 ExtremeWare 7.7 Command Reference Guide
Security Commands
configure auth netlogin radius-accounting
configure auth netlogin radius-accounting primary [<ipaddress> |
<hostname>] {secondary [<ipaddress> | <hostname>]}
Description
Configures the use of RADIUS accounting servers for netlogin session accounting.
Syntax Description
Default
Unconfigured. Uses RADIUS for authentication for login sessions. If RADIUS is not enabled,
servers are used. If neither RADIUS nor servers are configured, local authentication is used.
Usage Guidelines
The RADIUS accounting servers should be configured before this command is used. This command
returns an error if the given primary and secondary RADIUS servers are not configured or if RADIUS
authentication is not configured for netlogin sessions.
The following types of netlogin sessions can be configured:
• Dot1x-based netlogin
• Web-based netlogin
If you are using RADIUS authentication servers, you should only use RADIUS accounting servers for
accounting management sessions. RADIUS authentication servers should be configured before
configuring RADIUS accounting servers for management sessions.
Example
This example configures both primary and secondary RADIUS accounting servers for network login:
configure auth netlogin radius-accounting primary 192.168.14.12 secondary
192.168.14.55
History
This command was first available in ExtremeWare 7.3.0 and in ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
primary Configures the primary RADIUS accounting server that is used for netlogin sessions.
secondary Configures the secondary RADIUS accounting server that is used for netlogin sessions.
ipaddress The IP address of the primary or secondary accounting server.
hostname The host name of the primary or secondary accounting server.