Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 1632 / 2620

1632 ExtremeWare 7.7 Command Reference Guide
STP Commands
6 802.1D DISABLED 4 e------- 16 16390 00:00:00:00:00:00:00:00
7 802.1D DISABLED 4 e------- 16 16391 00:00:00:00:00:00:00:00
8 802.1D DISABLED 4 e------- 16 16392 00:00:00:00:00:00:00:00
------------------------- Flags: ----------------------------
1: e=Enable, d=Disable
2: L = Loopback port
3: (Port role) R=Root, D=Designated, A=Alternate, B=Backup
4: (Config type) b=broadcast, p=point-to-point, e=edge, a=auto
5: (Oper. type) b=broadcast, p=point-to-point, e=edge
6: p=proposing, a=agree
7: (partner mode) d = 802.1d, w = 802.1w
8: i = edgeport inconsistency
The following command displays the detailed spanning tree configurations for s0 :
show stpd s0 ports detail
The results for this command are as follows:
* Summit400-48t:4 # show stpd s0 ports detail
Stpd: s0 Port: 13 PortId: 400d Stp: ENABLED Path Cost: 4
Port Mode: 802.1D
Port State: FORWARDING Topology Change Ack: FALSE
Port Priority: 16 Loopback Port: FALSE
Designated Root: 00:00:00:00:00:00:00:00 Designated Cost: 0
Designated Bridge: 00:00:00:00:00:00:00:00 Designated Port Id: 0
Partner STP version: Dot1d
Stpd: s0 Port: 14 PortId: 400e Stp: ENABLED Path Cost: 4
Port Mode: 802.1D
Port State: FORWARDING Topology Change Ack: FALSE
Port Priority: 16 Loopback Port: FALSE
Designated Root: 00:00:00:00:00:00:00:00 Designated Cost: 0
Designated Bridge: 00:00:00:00:00:00:00:00 Designated Port Id: 0
Partner STP version: Dot1d
* Summit400-48t:5 #
History
This command was first available in ExtremeWare 6.2.2.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.