Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 1199 / 2620

configure debug-trace ipxsap-message
ExtremeWare 7.7 Command Reference Guide 1199
configure debug-trace ipxsap-message
configure debug-trace ipxsap-message <debug level> vlan <vlan name>
Description
This command records debug information to the syslog.
NOTE
This command is available only on the “i” series switches.
Syntax Description
Default
The default level is 0.
Usage Guidelines
The
debug level
range is 0 to 5. Higher levels record more verbose messages. Higher levels also
record the messages recorded at lower levels.
Example
The following command sets the reporting level for IPX SAP message errors to 3:
configure debug-trace ipxsap-message 3
Following is the log output at this level:
<INFO:USER> admin logged in through console
<DBUG:XSAP> Generating SAP query (opcode=0001, svc type=ffff)
<INFO:SYST> Port 2:1 link active 100Mbs FULL duplex
<INFO:SYST> Port 2:1 link down
<INFO:SYST> User admin logged out from console
<INFO:SYST> Log cleared
<INFO:SYST> serial admin: clear log
History
This command was first available in ExtremeWare 6.1.
debug level Specifies a debug level:
0 — None.
1 — None.
2 — Verifies that IPX SAP messages are being sent and received.
3 — Verifies the contents of the messages.
4 — Displays a dump of each packet.
5 — No additional information recorded.
vlan name Specifies a VLAN name.