Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 998 / 2620

998 ExtremeWare 7.7 Command Reference Guide
Security Commands
disable netlogin
disable netlogin [web-based |dot1x |mac]
Description
Disables network login modes.
Syntax Description
Default
Web-based and 802.1x authentication are enabled by default.
MAC-based authentication is disabled by default.
Usage Guidelines
All types, any combination of types, or no type of authentication can be enabled on the same switch. To
enable an authentication mode, use the following command:
enable netlogin [web-based | dot1x |mac]
This command was first introduced as
disable netlogin
, which disabled the initial version of
network login, the web-based mode. The original command was subsequently deprecated when the
802.1x mode of network login was introduced in ExtremeWare 7.1.0. The deprecated version of the
command is temporarily supported in configurations. During an upgrade, the deprecated command
disable netlogin
will be interpreted as:
disable netlogin web-based
disable netlogin dot1x
Example
The following command disables web-based authentication for network login:
disable netlogin web-based
The following command globally disables MAC-based RADIUS authentication for network login:
disable netlogin mac
History
This command was first available in ExtremeWare 7.0.0.
The
web-based
and
dot1x
keywords were added in ExtremeWare 7.1.0, and the initial version of the
command (without the new keywords) was deprecated.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.1e.
web-based Specifies web-based authentication.
dot1x Specifies 802.1x authenticating.
mac Specifies MAC-based RADIUS authentication.