Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 2355 / 2620

configure inline-power detection
ExtremeWare 7.7 Command Reference Guide 2355
configure inline-power detection
configure inline-power detection [auto | discovery-test-only] ports
<portlist>
Description
Sets the power detection mechanism on the specified ports.
NOTE
This command is available only for the Alpine FM-32Pi PoE Module and the Summit 300-48 switch.
Syntax Description
Default
Auto
Usage Guidelines
This command controls the power detection mechanism on the specified ports. Test mode forces power
discovery operations; however, power is not supplied to detected PDs.
Example
The following command forces automatic power discovery operations and specifies that power will be
supplied to detected PDs for ports 4 – 6 on slot 3:
configure inline-power detection auto ports 3:4-3:6
History
This command was first available in ExtremeWare 7.2.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available only on Alpine FM32-Pi PoE Modules and the Summit 300-48 switch.
auto Forces automatic power discovery operations and specifies that power will be supplied to
detected power devices (PDs) for the specified ports.
discovery-test-only Forces power discovery operations and specifies that power will not be supplied to
detected PDs for the specified ports.
portlist Specifies one or more slots and ports. On a modular switch, can be a list of slots and
ports. On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2,
3-5, 1:*, 1:5, 1:6-1:8.