Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 1982 / 2620

1982 ExtremeWare 7.7 Command Reference Guide
BGP Commands—“i” Series Switches Only
disable bgp peer-group
disable bgp peer-group <peer group> {soft-in-reset}
{remove-private-AS-numbers}
Description
Disables a BGP peer group and all the neighbors of the peer group.
Syntax Description
Default
Disabled.
Usage Guidelines
You can use BGP peer groups to group together up to 200 BGP neighbors. All neighbors within the peer
group inherit the parameters of the BGP peer group. The following mandatory parameters are shared
by all neighbors in a peer group:
• remote AS
• source-interface
• out-nlri-filter
• out-aspath-filter
• out-route-map
• send-community
• next-hop-self
Example
The following command disables the BGP peer group outer and all of its neighbors:
disable bgp peer-group outer
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on “i” series of switches.
peer group Specifies a peer group.
soft-in-reset Specifies the soft input reset feature.
remove-private-AS-numbers Specifies to remove private AS numbers.