Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 750 / 2620

750 ExtremeWare 7.7 Command Reference Guide
Commands for Status Monitoring and Statistics
disable sflow ports
disable sflow ports [<portlist> | all]
Description
Disables sFlow statistical packet sampling on a particular list of ports.
NOTE
This command is available only on the “i” series switches.
Syntax Description
Default
Disabled
Usage Guidelines
This command disables sFlow statistical packet sampling on a particular list of ports. When sFlow is
disabled on a port, sampling and polling stop on that port. If sFlow is disabled globally, all sampling
and polling stops.
Use the following command to disable sFlow globally:
disable sflow
Sampling and polling must first be stopped on every port using the
disable sflow ports
command
before all ports can be disabled globally with the
disable sflow
command.
Example
The following command disables sFlow sampling on port 3:1:
disable sflow ports 3:1
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available only on the “i” series platforms.
portlist Specifies a list of ports or slots and ports. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
all Applies the command to all ports.