Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 1402 / 2620

1402 ExtremeWare 7.7 Command Reference Guide
Wireless Commands
show wireless ports interface ap-scan status
show wireless ports [<portlist> | all] interface [1|2] ap-scan status
Description
Displays the status of the AP scan for the port and interface.
Syntax Description
Default
N/A
Usage Guidelines
Use this command to check the AP scan status on a particular port and interface.
Examples
The following command shows the status of the AP scan for the port and interface:
show wireless port 1:5 interface 1 ap-scan status
The output of the command is similar to the following:
Intf Enabled Num-Probes Num-APs WaterMark TimeOuts Overflows OCS
-------------------------------------------------------------------------------
1:1 N 0 0 0 0 0 N
History
This command was first available in ExtremeWare 6.2a and added to the “ e ” series in 7.3e.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine
switches.
portlist Specifies one or more ports or slots and ports. Can be one or more port numbers. May be in the form
1, 2, 1:2, 3-5, 2:*, 2:5, 2:6-2:8.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.