Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 875 / 2620

configure cpu-dos-protect trusted-ports
ExtremeWare 7.7 Command Reference Guide 875
configure cpu-dos-protect trusted-ports
configure cpu-dos-protect trusted-ports [add <port number> | delete <port
number> | all | none]
Description
Configures the trusted port feature at a system level.
Syntax Description
Default
By default, no ports are trusted.
Usage Guidelines
Use this command to define one or more ports as trusted ports, to delete trusted ports, or to specify that
no ports are trusted. Typically, you would use the
all
parameter when you want to set the denial of
service protection to only a few of the ports on a switch. Use the
all
parameter, then use the command
configure cpu-dos-protect trusted-ports delete <port number>
to set ports that should not be
trusted (that denial of service protection should be applied to).
Example
The following command configures a port as trusted, so that denial of service protection is not applied
to port 3:
configure cpu-dos-protect trusted-port add 3
History
This command was first available in ExtremeWare 7.0.0.
This command was added to the Summit “ e ” series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
port number Specifies a port.
all Specifies all ports as trusted.
none Specifies that no ports are trusted.