Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 381 / 2620

configure vlan add secondary-ip
ExtremeWare 7.7 Command Reference Guide 381
configure vlan add secondary-ip
configure vlan <vlan-name> add secondary-ip <sec-ip-address> {<sec-ip-mask>
| <mask-length>}
Description
Configures the secondary IP address for the selected VLAN.
NOTE
This command is available only on the “i” series switches.
Syntax Description
Default
N/A
Usage Guidelines
Use this command to configure a secondary IP address for the specified VLAN.
Secondary IP addresses specify a local subnet on the switch and must be unique.
Multinetting must have been globally enabled before a secondary IP address is configured for a VLAN.
You can configure a maximum of 64 secondary IP addresses.
A secondary IP address can be configured only if a primary IP address has been configured already for
the VLAN.
Secondary IP addresses cannot be modified. They must be deleted and added again. Use the following
command to delete a secondary IP address:
configure vlan delete secondary-ip
Example
The following command configures the secondary IP address for the VLAN named test1 :
configure vlan test1 add secondary-ip 95.0.0.1/24
vlan-name Specifies the name of the VLAN to be configured.
add-secondary-ip Specifies that the secondary IP address is to be configured.
sec-ip-address Specifies the secondary IP address for the VLAN.
sec-ip-mask (Optional) Specifies the network mask.
mask-length (Optional) Specifies the network mask in bits.