Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 112 / 2620

112 ExtremeWare 7.7 Command Reference Guide
Commands for Accessing the Switch
The modules that can be rebooted are: E1, T1, T3, ARM, ATM, MPLS, PoS, and slave or switch fabric
MSM modules.
NOTE
When you configure a timed reboot of an MSM, you can use the
show switch
command output to view
the configuration.
The E1, T1, and T3
reboot slot
command does not support the
time
or
cancel
keywords, so this
command can only be executed immediately.
Example
The following command reboots the switch at 8:00 AM on April 15, 2002:
reboot time 04/15/2002 08:00:00
On the “ i ” series of switches, the following command reboots the MPLS module in slot number 5. It
would also reboot the fifth switch in a stack of switches on the “ e ” series of switches:
reboot time 10/04/2001 10:46,00 slot 5
History
This command was first available in ExtremeWare 2.0.
This command was modified in ExtremeWare 7.0.0 to include the
slot
option.
This command was modified in ExtremeWare 7.1.0 to include the
msm-a
and
msm-b
options.
This command was added to the “ e ” series of switches in ExtremeWare 7.1e.
This command was modified in ExtremeWare 7.4 to support the slot option on the “ e ” series of
switches.
Platform Availability
This command is available on all platforms.